. With Body Mass Index Features Owner’s Manual CARDINAL SCALE MFG. 8555-M483-O1 Rev A PO Box 151 Webb City, MO 64870 11/11 Printed in USA Ph: 417-673-4631 Fax: 417-673-5001 www.detectoscale.com Technical Support: Ph: 866-254-8261 techsupport@cardet.com 8555-M483-O1 Rev A 750 Owner’s. 8555-M483-O1 Rev A 750 Owner’s. Serial Number Date of Purchase Before using this indicator, read this manual and pay special attention to all 'WARNING' Purchased From symbols: IMPORTANT ELECTRICAL RETAIN THIS INFORMATION FOR FUTURE USE WARNING 8555-M483-O1 Rev A 750 Owner’s. For this reason the Seller is not able to guarantee the result of any procedure contained herein.

• Brochures
• Bathroom Scales

View and Download Detecto 758C supplementary manual online. Indicating Element. 758C Measuring Instruments pdf manual download.

Nor can they assume responsibility for any damage to property or injury to persons occasioned from the procedures. Persons engaging the procedures do so entirely at their own risk.

Brochures

2 II 8555-M483-O1 Rev A 750 Owner’s. This manual is provided to guide you through installation, operation and maintenance of your indicator. Please read it thoroughly before attempting to install or operate your 750 and keep it handy for future reference. This page intentionally left blank.

8555-M483-O1 Rev A 750 Owner’s. Electrical Power The 750 indicator has been designed to operate from a 100 to 240 VAC 50/60Hz 12 VDC 1A wall plug-in UL/CSA listed AC power adapter (Cardinal part number 6800-1045). Note that a special order is not required for operation at 230 VAC. Spring Plunger Release Figure No.

3 Interconnections The load cell input and power connections are made at the bottom rear panel of the indicator. Refer to Figure No. 1 for the rear panel layout. 8555-M483-O1 Rev A 750 Owner’s. Refer to Figure No. 1 for the rear panel layout.

Load Cell Connection The load cell cable connects to the 750 via a 9-pin 'D' connector on the rear panel of the indicator. 4 shows the pin identification for the load cell connector. Make certain that the pins are correctly identified before soldering a wire to them. INSTRUCTIONS. Battery Status The 750 indicator will operate for up to 250 hours on new Alkaline batteries or for up to 100 hours on fully charged Ni-Cad or NiMH batteries depending on the condition of the batteries (from new to about 500 recharges).

The battery bar graph on the display indicates the battery. If not, remove panel and check for one or more improperly positioned batte ries. Return the indicator to the scale mounting bracket.

Bathroom Scales

The indicator is now ready for operation. 7 8555-M483-O1 Rev A 750 Owner’s. This is the UNITS key. It is used to change the weighing units to the alternate units of measurement. For example, with pounds displayed, pressing this key will change the weighting units to kilograms. This feature must be enabled during setup and calibration for this key to be operational.

8555-M483-O1 Rev A 750 Owner’s. (Down Arrow/Print) key is used to signal completion of the data entry, process the data entered and print the data if a printer is used.

The indicator will not respond to pressing the (Down Arrow/Print) key unless the weight display is stable. 8555-M483-O1 Rev A 750 Owner’s.

This annunciator is turned on to indicate that the displayed weight is in pounds. This annunciator is turned on when the displayed height measurement is in centimeters. FEET INCHES These annunciators are turned on when the displayed height measurement is in feet and inches. 8555-M483-O1 Rev A 750 Owner’s. The BMI/ENTER key can be used to toggle between the calculated BMI value and the weight until the scale goes below 10% of capacity (40 lbs). At that point, a new height input is required. 8555-M483-O1 Rev A 750 Owner’s.

They can not be printed. Serial ID Storage The 750 has been equipped with Serial ID storage for 200 records. Each ID stores the ID index, Weight, Height, BMI and Unit of measure. When the BMI/ENTER key is pressed, the indicator will assign the current values to a new ID and store the ID in memory. SETUP AND CALIBRATION Your Model 750 indicator has been thoroughly tested and calibrated before being shipped to you. If you received the indicator with a scale, calibration is not necessary.

If the indicator is being connected to a scale for the first time or recalibration is necessary for other reasons, proceed as indicated. BMI/ENTER key to save it and proceed to the next prompt.

Allowable values are: 0 = Minimal Filter 1 = Moderate Filter 2 = Heavy Filter 3 = Custom Filter NOTE! If 3 = Custom Filter is selected, two additional prompts will be displayed.

8555-M483-O1 Rev A 750 Owner’s. Starting at the left and preceding right, a series of dashes will appear on the display. The dashes will stay on the display momentarily, then disappear, after which the display will proceed to the next prompt. 8555-M483-O1 Rev A 750 Owner’s.

Consult the factory Tech Support for the Acceleration of Gravity value for your location. Once the Gravity Constant has been set, both CALGC= and oPGC= must be set to the same value to disable it. 8555-M483-O1 Rev A 750 Owner’s. BMI/ENTER key to save it and proceed to the next prompt. Allowable values are: 0 or 1.

PUO=1 (YES) PUO=0 (NO) Weight display will be reset to weight display will not be reset to zero zero automatically on power up 8555-M483-O1 Rev A 750 Owner’s. Setup and Calibration Is Completed The setup and calibration process has been completed. The indicator will reset and then display weight. Remove power from the indicator and re-assemble for use. The indicator is now ready for normal operation. 8555-M483-O1 Rev A 750 Owner’s.

Disable or select number of minutes for automatic shutoff timer EVENT COUNTER The Model 750 Weight Indicator has been designed with an Event Counter type of security seal. When selected, the 750 will display two 3-digit numbers representing the Calibration and Configuration counters. Weight, BMI, Height Where: Weight: xxx.xuu G BMI: xx.x Height: x' xx.x” IMPORTANT!

The “ENQ” command will only work when the Unit= parameter is set to 1 (Pounds Only), 2 (Kilograms Only), 3 (Pounds/Kilograms) or 4 (Kilograms/Pounds). 8555-M483-O1 Rev A 750 Owner’s. SERIAL PRINT COMMANDS The Serial port on the 750 is a bi-directional port and can receive and transmit data. It can output to a printer as well as communicate to a computer.

Using the serial port, it is possible to control the printing operation of the 750 by transmitting commands to the indicator. Incorrect weight Insure that scale platform isn't touching an adjacent object. Displayed Have proper operation procedures been followed? Indicator will not Refer to Error and Status Displays section. Display weight 8555-M483-O1 Rev A 750 Owner’s. PARTS IDENTIFICATION Item Part Number Description 8555-D264-08 KEYPAD 8555-D478-0A PCB ASS’Y 750 CONTROLLER (SMT) 8555-C473-08 REAR PANEL, 750DS 8555-C253-08 FRONT PANEL 8555-C213-08 END CAP 8555-B257-0A BATTERY HOLDER 8555-B254-08 MOUNTING SPACER 6680-0004 WASHER, #6 LOCK INT. TOOTH 6610-2000 JACK SOCKET 6021-6008 SCREW, #6 X.375 TH SHEET METAL (BLACK).

PARTS IDENTIFICATION, CONT. 8555-M483-O1 Rev A 750 Owner’s. PARTS IDENTIFICATION, CONT. 8555-M483-O1 Rev A 750 Owner’s. PARTS IDENTIFICATION, CONT. 8555-M483-O1 Rev A 750 Owner’s. APPENDIX A INDICATOR MOUNTING BRACKETS Mounting Bracket Assembly 0033-B438-0A Mounting Bracket Assembly 0033-B439-0A 8555-M483-O1 Rev A 750 Owner’s.

APPENDIX A INDICATOR MOUNTING BRACKETS Mounting Bracket Assembly 0044-B315-0A Mounting Bracket Assembly 0046-B516-0A 8555-M483-O1 Rev A 750 Owner’s. APPENDIX A INDICATOR MOUNTING BRACKETS Mounting Bracket Assembly 0049-C039-0A 2.00 Inches Desk/Wall Mount Bracket Assembly 0033-B440-0A 8555-M483-O1 Rev A 750 Owner’s.

(1) year from date of shipment. Detecto shall be the sole judge of what constitutes a defect. This warranty sets forth the extent of our liability for breach of any warranty or deficiency in connection with the sale or use of the product.

Detecto will not be liable for consequential damages of any nature, including but not limited to, loss of profit, delays or expenses, whether based on tort or contract. 8555-M483-O1 Rev A 750 Owner’s 8555-M483-O1 Rev A 750 Owner’s.